![]() Initially, I’m able to focus on getting the booms and gaffs properly installed and rigged, without the sails getting in the way.Re-install the booms and gaffs, and their rigging.įor me, this approach (while more work) has several advantages:.De-rig the booms and gaffs, and remove them from the ship.Make the sails based on the actual layout of my ship.Everything was either tied off (easy to un-tie), or attached with a hook or shackle (easy to remove). That was fine with me, because I had avoided the use of glue when securing the rigging. Of course, this means that I had a bunch of rigging for the booms and gaffs that would need to be un-done so the booms and gaffs could be removed. Once I had everything installed on the ship, I could make templates for the sails that take into account both the plans and the size/shape of my actual build. So, I intentionally put off making sails until I had installed all the booms and gaffs. I’m not confident that all my booms and gaffs are 100% accurately sized, and I suspect that the dimensions of my sails might need to be adjusted to fit my particular ship. Add the additional rigging for each sail.Attach sails to the booms and gaffs as appropriate.Several of the sails need to be laced onto the booms and gaffs, and that is nearly impossible to do directly on the ship. When to Make Sailsįrom what I can tell, the general practice is to make the sails before rigging and installing the booms and gaffs. You’d probably never see a ship at sea actually set like this, but I think it works well for a model. I’m not going to set any sails off to the sides – everything is just going to be installed straight and even. I’m making all the sails, and installing them all in their raised state. Making sails simply ‘for display’ is what I’m doing. Realistic sails would try to show the ship in some kind of ‘real’ sailing state. In most cases, some sails would be raised while others would be lowered. Ships adjusted their sails depending on the situation. Realistic sails try to show the sails rigged and set as they would be while the ship is actually at sea. The sail is put in place, but is bunched up and tied to the appropriate boom or gaff. When doing furled sails, you typically don’t make the full sail, instead making smaller version. The advantage is that the sails don’t cover everything up and make a model look like a bunch of cloth. Many modelers choose to do furled sails on their ships. There are three different ways you can go:įurled sails are sails that are lowered. Here’s how I ended up doing it… Choosing How Sails are DisplayedĪn important decision to make before you start is how you’ll be displaying sails. I’ve never made sails before, so this will be a learning experience. However, the sails really do add something to the model, especially for a schooner like this. The remaining rigging is all attached to sails, so I’d leave it off if I didn’t include sails. With the booms and gaffs rigged and installed, I would basically be finished with the build if I omit the sails. The inclusion of sails was actually one of the factors that led me to select this kit for my second build. The Model Shipways kit was designed with sails, and includes the sail cloth as part of the kit. Many (most?) ship models do not include full sails. On my Model Shipways Bluenose build, I debated whether or not to make the sails. Bluenose Canadian Schooner Making Sails for Model Ships ![]()
0 Comments
Leave a Reply. |